Fitting Cat Flap In UPVC Door Panel

Cat flaps allow your pet move around whenever they want, without you having to let him in or out. They also can help stop your cat from urinating in the home.

It is easier to install the cat flap on a upvc panel than on a glass one but you'll require some expertise and appropriate tools.

Measure the Door

Fitting a cat door in the front door is difficult however, so long as the cat flap is the correct one and you follow the instructions it shouldn't be too difficult. We will show you how to draw the shape, using an jigsaw for cutting out the back door with cat flap fitted's opening and then complete the job by fixing the flap to the door. This will ensure that the flap remains in place and shields the door from rain and wind which can cause damage.

To determine the size of the cat flap that you require, take a measurement of the width of your pet. This will allow you to choose a cat flap that is big enough for your pet to go into the house and leave without needing to open the door every time.

If your kit comes with an illustration of the location to drill, then put it on the door, and then use a pencil around it. If your door has sill or moulding on the bottom of it ensure you have enough clearance from these to keep your cat safe and will prevent them from getting access to your home.

Put on your eye protection and a dust mask and using a jigsaw begin cutting along the line that you have pencilled in. Don't press the blade too hard, as this will make it cut faster than you'd like it to. If you have a set square then make use of it to verify that you are cutting correctly and also to ensure that the hole is a good rectangle. Once you are satisfied with the shape, you can start to remove the rest of the door material.

Draw a Line

The cat flap installer near me flap is a great way to allow your pet to go in and Fitting Cat flap in upvc door panel out without worrying about them being a nuisance to a visitor, or leaving unwelcome gifts in the house. It also reduces drafts and helps to keep the temperature in your home stable. Fitting Cat Flap In Upvc Door Panel a cat flap to your door can be a daunting task for those who haven't attempted it before. Many people call an expert joiner or carpenter to do the work. While this is definitely an option, it is possible to do the job yourself if you own the right tools and follow the instructions with care.

This is much simpler to do with a wooden door, but it is still possible using uPVC. However, you must be careful not to damage the doors since this could make it impossible to claim your warranty. First, you must measure the door to ensure that it can accommodate the new cat-flap. This isn't too difficult when you have the standard uPVC door, but you may need to take more care if using an insulated or composite door cat flap type of door as these are more difficult to cut than solid uPVC panels.

Next, you will need to determine the height of your belly for your cat. This is the height from the floor to the underside of the cat's stomach, and you'll need find a spot on the door that will be within the range your cat can comfortably pass through. Once you've got the information, you'll need to mark the area with a spirit level and a pencil so you are sure that the opening will fit your cat.

Once you've marked the area, it's now time to cut the hole. You will require a jigsaw and it is crucial to be patient to ensure that the cuts are smooth and straight, rather than rough and uneven, as this could damage your door. It is also important to wear safety glasses and a dust mask whenever using the jigsaw, as dust from the saw can be dangerous to your health. After you've cut the hole, you will require sandpaper to smooth the edges so that the cat flap can be easily inserted.

Cut a Hole

The process of fitting a cat flap into an existing door panel or double glazing sealed unit can be difficult. You might be tempted to tackle the task yourself, but unless you have a lot of expertise in DIY, it's likely to be best to have a professional in to do the job for you. A shoddy job might not only look ugly, but also an issue for security and also allow cold air to enter when the cat is outside and hot air to escape inside.

The first thing you have to do is mark out the location of the hole in the door with a pencil and a spirit level. This will ensure that it is correctly placed and runs flush with all the other components of the door. Make sure you have a piece of sandpaper at hand to smooth any edges.

Wear any safety equipment you'll need to use an electric tool. If you're worried about the noise, you can purchase a cordless jigsaw which is quieter and easier.

It is essential to only cut away the material needed to make the cat flap. It is essential to leave a bit of material to make the wall thickness of the cat flap. However cutting away too much could cause issues or even damage the frame of the door.

If the upvc door features a metal panel or frame, it may interfere with the microchip flap. In this case you'll need create an over-sized hole to ensure that the metal doesn't get in contact with the wall of the flap.

If you're planning to install a cat flap into windows made of double-glazed or upvc with metal frames, you'll need to consult an expert. They will offer you a brand new piece of glass that has the hole that is already designed for the cat flap. It is much less expensive to get this done rather than to attempt to fix a cat flap into an existing glass pane that was not designed specifically for the purpose.

Install the Flap

Cat flaps allow your pet to come and go as they please, giving them the freedom to relax inside the house when they're feeling like it. If you have a uPVC front door, it can be difficult to put in a cat flap. This is particularly true in the event that you don't own glass panels which can be cut. If you are willing to install a half-glazed uPVC replacement panel, it's possible to add a cat flap. It's not as easy as just cutting a hole in the door though and there are some things you'll need to do first to ensure that it's secure.

A composite, uPVC or GRP door panel is generally comprised of a thin plastic skin that is bonded to an insulating polystyrene core. The material is extremely fragile and care should be taken when cutting into it to avoid causing damage. This kind of door typically has a template which you can use as a reference to cut the hole into your door.

Once you have marked the location of the hole in your door, it's time to put in the cat flap. You can purchase and install a wide variety of different models, from basic button operated ones to microchip-activated ones that only let in your pet. However, no matter what type of cat flap you select, it's important to make sure that your cat is able to use the flap without getting trapped in the weather.

It is a good idea to select circular fittings rather than one that is square, since circles are more securely cut into the door glass. This is because square holes make glass more vulnerable to cracking if drills are used on it. This is also a safer choice because you won't need to drill into the toughened glass which could break and hurt your pet or family members. This is especially important if you have a child or elderly person at home who could be injured by shards glass.